HIGHLIGHTS

Improved Airflow
Faster Turbo Spool
Increased Turbo Sounds
Easy 30 Minute Installation
Premium Materials Throughout

PROFILE

The ARM N63TU3 Intake system is designed to improve airflow and increase throttle response on BMW’s 3rd generation of the N63 found in the M550i M850i and 750i. Installing the ARM N63TU3 Intake on your BMW is easy, without any cutting or drilling involved, and only takes about30 minutes. The ARM N63TU3 Intake will work perfectly with Stage 1 or Stage 2 tunes. It is also compatible with the OEM tune. The photo below is shown with theARM N63R/N63B Charge Pipeswhich are not included with the ARM N63TU3 Intake.

This ARM N63TU3 Intake will fit the version of theN63 which is pictured below.

CONSTRUCTION

The ARM N63TU3 Intake is made with6-layer reinforced silicone couplerswhich have a 3″ connection at one end to utilizethe factory turbo inlets. The couplers increase smoothly all the way up to3.5″at the opposite end where theARM Dry Filtersare installed.By using silicone couplers as the material for the intake runners, we are able to maximize the size between the OEM turbo inlets and the ARM Air Filterswhile retaining the strut braces. Since the runner between the filter and turbo inlets must pass though the strut braces, using a silicone material prevents wear and ratting found with aluminum runners.

The ARM Dry Air Filters included in the kit are made of high quality multimediamaterial designed to allowmaximum airflow to your engine while providing effective filtration.These filters are engineered with multiple layers of filtration media, including a high-flowing synthetic fiber layer that captures even the smallest particles, while allowing for maximum airflow to the engine.The ARM Dry Filters help to ensure that your engine has the most airflow available while being protected from harmful contaminants.The total surface area of the ARM N63TU3 Air Filters is 145 cu. in. each, making the totalcombined surface area of both filters 290 cu. in.

The ARM N63TU3 Intake isdesigned tokeep the filters as far away from engine heat as possible. The filters are positioned at the front of the engine bay, where it can take advantage of the fresh air that is directed into the engine compartment from the OEM air ducts just below where they are positioned.

IN THE BOX

2xSilicone Couplers
2x Dry Air Filters
2x Aluminum Joiners
4x T-Bolt Clamps
2x Worm Clamps

FITMENT GUIDE

The ARM N63TU3 Intake will fit the models listed below with the N63TU3 (N63B) engine. Your engine should look like the image below. If it doesn’t please check out our “WHAT TYPE OF N63 DO YOU HAVE IN YOUR BMW?” blog post to see which version you have.