HIGHLIGHTS

Gain up to +60whp/60wtq
Faster Turbo Spool
Increased Turbo Volume

PROFILE

The ARM Motorsports N54 Inlets are the ultimate relocated inlet system for your N54. Relocating the inlets on your N54with the ARM Inlets increase the power and torque of your N54 up to 60whp/60wtq. Expectimproved turbo spool, faster peak boost, and more volume from the turbochargers on your N54. If you’re looking to max out your stockor upgraded twinturbochargers these are a must!

The stock N54 inlets are narrow and flat, greatly restricting airflow to the turbochargers and handicapping their ability to spool quickly and hit target boost. The stock inlets connectfrom turbos on the passenger side of the engine to the airbox or upgraded intake on the driver-side, essentially “hugging” the engine. The stock inlet for the rear turbo wraps behind the engine while the stock front inlet wraps around the front of the engine where they come to meet on the driver-sideand connect to either the stock airbox or upgraded intake, whichever you have your N54 equipped with.

CONSTRUCTION

The ARM N54 Relocated Inlets are constructed of high-temperature steel-reinforced silicone and move the intake filters for the turbochargers from the driver-side of the engine over to the passenger-side, reducing the length the intake air needs to travel significantly.

One of the greatest challenges when upgrading to relocated inlets on your N54 is mitigating the heat of the air induced by the turbos. With the inlets relocated to the passenger-side the filters are closer to the turbochargers where temperatures are hotter. The ARM N54 Inlets come with amanifold heat shieldwhich serves to help keep heat down near the turbos and away from the inlet filters. It also assists with keeping heat away from the inlet tubes themselves.

In addition, the ARM Inlets come with anair filter heat shieldwhich assists in keeping the cooler air near the filters separate from hotter air coming from the engine adjacent to it.

The air filters on the ARM Inlets aresecured in place with afilter bracket which prevents filters and inlets themselves from bouncing aroundduring acceleration,braking, and cornering.Alsoincluded with the ARM Inlets is a support bracket for the boost solenoids. This keeps them locked into place duringextremedriving.

To help make installation easy, relocation brackets for the coolant reservoir and power steering pump reservoir are included with the ARM Inlets.

IN THE BOX

ARM Relocated Inlets
Manifold Heat Shield
Air Filter Heat Shield
Coolant Reservoir Relocation Brackets
Power Steering Reservoir Relocation Bracket
Boost Solenoid Bracket
Clamps

FITMENT GUIDE

The ARM inlets currently only fit the following Left-Hand-Drive vehicles.